Read the manufacturer’s instructions and safety data sheet
Work in a well-ventilated area
Wear gloves, safety glasses, and a respirator if required
Protect your work surface with plastic, silicone mat, or release paper
Measure resin and hardener exactly in the specified ratio
Pour both parts into a clean mixing cup
Mix slowly and thoroughly, scraping the sides and bottom
Transfer to a second clean cup and mix again if recommended
Add colorants, glitter, or fillers only if compatible with the resin
Prepare molds, forms, or the surface before pouring
Pour the mixed epoxy carefully to avoid bubbles
Remove bubbles with a heat gun, torch, or by letting it rest
Keep dust away while the epoxy cures
Follow the recommended working time and curing time
Maintain the proper temperature during curing
Do not touch or move the piece until fully cured
Sand and polish after curing if needed
Clean tools immediately with the recommended solvent or before hardening
Dispose of leftover resin and contaminated materials according to local rules