Turn off the water supply
Open the taps to drain remaining water
Plug the drain to catch small parts
Remove the tap handles
Unscrew and remove the tap...
Turn off the water supply valves under the sink
Open the faucet to release any remaining water
Place a bucket or towel under the sink
Disconnect the...
Turn off the water supply if needed
Remove the overflow cover plate
Disconnect the overflow linkage if present
Use a tub drain wrench or drain key to...
Measure and dry-fit the sink under the countertop
Mark the sink outline and mounting clip locations
Clean the underside of the countertop and the sink rim
Apply...
Clean the male pipe threads
Hold the fitting with the threads facing you
Start the tape at the end of the threads
Wrap the tape clockwise
Overlap each...
Turn off the water supply valve behind the toilet
Remove the tank lid carefully
Locate the fill valve and float mechanism
Adjust the float height up to...
Turn off the water supply to the toilet
Remove the tank lid
Flush the toilet to lower the water level
Locate the float mechanism
Adjust the float height
Turn...
Wear gloves and eye protection
Remove the drain cover
Insert the snake into the drain
Push the snake forward until you feel resistance
Rotate the handle to break...
Shut off the water supply
Drain the pipe system
Measure the riser pipe diameter
Select the correct riser clamp size
Position the clamp around the riser pipe
Align the...
Put on gloves and safety glasses
Remove the drain cover or stopper
Insert the snake into the drain opening
Push the snake in until you feel resistance
Twist...
Remove the drain stopper or strainer
Clean out any debris around the drain
Insert a drain wrench or drain key into the crossbars or slots
Turn counterclockwise...
Turn off the garbage disposal switch
Turn off power at the circuit breaker
Check the sink for standing water
Use tongs or pliers to remove visible objects
Insert...
Locate the sink stopper linkage under the sink
Find the horizontal pivot rod connected to the drain tailpiece
Loosen the retaining nut on the pivot rod
Pull...