Clean the window thoroughly
Remove all dirt, grease, and residue
Measure the window and cut the tint slightly larger
Mix water with a few drops of baby shampoo or tint solution in a spray bottle
Spray the window generously
Peel the backing off the tint film
Spray the adhesive side of the film
Place the film onto the wet window
Align the film carefully
Smooth the film from the center outward with a squeegee
Remove air bubbles and excess water
Trim the edges with a sharp blade if needed
Squeegee the edges again
Wipe away any remaining moisture
Let the tint cure without rolling down the window or touching it