How To Jump A Car With Jumper Cables?

Park the working car close enough for the cables to reach, but do not let the vehicles touch

Turn both cars off, remove keys, and set the parking brakes

Put both cars in park or neutral

Open both hoods and locate the batteries

Identify the positive and negative terminals on both batteries

Connect one red clamp to the dead battery’s positive terminal

Connect the other red clamp to the working battery’s positive terminal

Connect one black clamp to the working battery’s negative terminal

Connect the other black clamp to an unpainted metal ground on the dead car, away from the battery

Start the working car and let it run for a few minutes

Try starting the dead car

If the dead car starts, keep both cars running for a few minutes

Remove the cables in reverse order

Keep the jumped car running to recharge the battery

If the car does not start, wait a few minutes and try again

If it still does not start, stop and seek roadside assistance

Suggested for You

Trending Today