Measure the room and buy enough linoleum flooring, adhesive, and supplies
Remove baseboards, doors if needed, and all existing flooring
Clean the subfloor thoroughly and let it dry
Repair cracks, holes, and uneven areas in the subfloor
Sand high spots and vacuum all dust and debris
Acclimate the linoleum in the room according to the manufacturer’s instructions
Roll out the linoleum and let it relax flat
Cut the linoleum to fit the room, leaving a small excess at the edges
Dry-fit the linoleum and trim as needed
Apply the recommended adhesive to the subfloor
Lay the linoleum into the adhesive carefully
Smooth it from the center outward to remove air bubbles
Use a floor roller to press the linoleum firmly into place
Trim the edges neatly along walls and corners
Reinstall baseboards and transition strips
Avoid heavy traffic until the adhesive has fully cured