Read the fireplace’s lighting instructions on the unit or in the manual
Make sure the gas supply is on
Confirm the fireplace and surrounding area are clear of flammable items
Open the fireplace access panel
Turn the control knob to the off position
Wait at least 5 minutes if the fireplace was recently used
Turn the control knob to pilot
Press and hold the control knob or pilot button
Use the igniter button or a long lighter to light the pilot
Keep holding the control knob for 30 to 60 seconds after the pilot lights
Release the knob and confirm the pilot stays lit
Turn the control knob to on
Use the wall switch, remote, or control panel to ignite the main burner
Adjust the flame using the control settings if available
Close the access panel
Turn the fireplace off when finished by using the switch, remote, or control knob
Call a professional if the pilot will not stay lit or you smell gas