Locate the opener unit on the ceiling
Find the Learn, Program, or Set button
Press and release the Learn button
Wait for the indicator light to turn on or blink
Within 30 seconds, press and hold the remote button you want to program
Release the button when the opener light blinks or clicks
Test the remote to confirm it works
Repeat for any additional remotes
To reprogram a keypad, press the Learn button again
Enter the new code on the keypad
Press the Enter or Program key
Test the keypad to confirm it works
To erase old remotes, press and hold the Learn button until the indicator light turns off
Reprogram all remotes and keypads after clearing memory
Replace remote batteries if programming fails
Check the opener manual for model-specific steps