Wash the vehicle thoroughly
Decontaminate the paint with iron remover and clay bar
Dry the surface completely
Inspect the paint for defects
Polish the paint if needed
Wipe the surface with isopropyl alcohol or panel wipe
Work in a clean, shaded, dust-free area
Put on gloves
Apply a few drops of ceramic coating to the applicator
Spread the coating in small sections using crosshatch motions
Allow the coating to flash according to the product instructions
Level the coating with a clean microfiber towel
Check for high spots and remove them immediately
Repeat section by section until the entire surface is coated
Let the coating cure for the recommended time
Avoid water, dirt, and touching the surface during curing
Apply a second layer only if the product allows it
Maintain the coating with pH-neutral car shampoo and proper drying methods