Wash the car thoroughly with car shampoo
Decontaminate the paint with iron remover and clay bar
Dry the car completely
Inspect the paint for scratches, swirls, and defects
Polish the paint if correction is needed
Wipe the surface with isopropyl alcohol or panel wipe
Work in a clean, shaded, dust-free area
Wear nitrile gloves
Shake the ceramic coating bottle well
Wrap the applicator suede or microfiber around the applicator block
Apply a few drops of coating to the applicator
Spread the coating onto a small section in a crosshatch pattern
Keep the section size manageable
Watch for flashing or rainbowing
Level the coating with a clean microfiber towel
Use a second microfiber towel for final buffing
Repeat panel by panel
Inspect for high spots or streaks
Reapply to missed areas if needed
Allow the coating to cure for the recommended time
Avoid water, dust, and touching the paint during curing
Keep the car indoors if possible during initial cure
Follow the product-specific maintenance instructions
Wash the car with pH-neutral soap after curing
Use ceramic-safe maintenance products
Avoid abrasive polishes and harsh chemicals