Unplug the coffee maker and let it cool
Remove and discard any used coffee grounds or filters
Empty the water reservoir and rinse it with clean water
Wash the carafe, lid, and any removable parts with warm soapy water
Rinse removable parts thoroughly and dry or air-dry
If using a descaling solution: fill the reservoir with the recommended amount of descaler plus water (per product directions)
If using white vinegar: fill the reservoir with equal parts white vinegar and water
Place the empty carafe (with no filter) under the brew spout
Start a brew cycle and run until the reservoir is about halfway empty
Turn the machine off and let it sit 15–30 minutes
Resume the brew cycle until the reservoir is empty
Let the carafe cool, then discard the liquid
Run 1–2 full cycles with clean water to rinse out any remaining descaler/vinegar
Discard the rinse water after each cycle
If the machine still smells or tastes like vinegar/descaler, run an additional rinse cycle
Wipe the exterior, warming plate, and brew area with a damp cloth
Reassemble the machine once everything is clean and dry
Brew and discard 1 full pot of fresh water before brewing coffee if you notice any residue or odor