Use a plastic scraper or razor blade to lift an edge of the label side coating
Peel the reflective layer slowly from the center outward if it separates cleanly
Soak the disc in warm water with mild dish soap for several minutes
Rub the label side gently with a soft cloth or your fingers to loosen the coating
Use adhesive remover on a cloth to help lift stubborn residue
Wipe the surface clean with isopropyl alcohol
Repeat soaking and peeling until the reflective layer is removed
Avoid bending the disc too much to prevent cracking
Wear gloves and work in a ventilated area when using solvents