HTuse
How to Tighten Chainsaw Blade?
1 / 14
How-to guide
How to Tighten Chainsaw Blade?
12 steps
4 min read
Swipe
01/ 12
Turn off the chainsaw and let the chain cool
02/ 12
Disconnect the spark plug wire or remove the battery
03/ 12
Wear gloves
04/ 12
Loosen the guide bar nuts slightly
05/ 12
Locate the chain tension adjustment screw or knob
06/ 12
Turn the tensioner until the chain fits snugly on the bar
07/ 12
Pull the chain away from the bar at the center; it should lift slightly but not come out completely
08/ 12
Tighten the guide bar nuts while holding the bar in place
09/ 12
Recheck the chain tension after tightening
10/ 12
Adjust again if needed
11/ 12
Rotate the chain by hand to ensure it moves freely
12/ 12
Reconnect the spark plug wire or reinstall the battery
Guide complete 🎉
You just learned “How to Tighten Chainsaw Blade?”
HTUSE