Open the joint roller and place a rolling paper into the tray with the adhesive strip facing up and away from you
Fill the paper evenly with your material, keeping it centered and not overpacked
Close the roller gently and use your fingers to roll the cylinders together to shape the material
Insert the filter tip at one end if desired before fully rolling
Continue rolling until the paper is wrapped tightly around the material
Lick the adhesive strip lightly to moisten it
Keep rolling a little more to seal the paper
Open the roller and remove the finished joint carefully
Twist or tuck the open end if needed
Check that the joint is packed evenly and adjust for airflow if necessary