Clean the surface thoroughly and let it dry completely
Measure and cut the holographic clear vinyl to size
Peel back a small section of the backing paper
Align the vinyl carefully with the surface
Apply the vinyl slowly from one edge to the other
Smooth it down with a squeegee or credit card as you go
Remove air bubbles by pressing them outward
Use a heat gun or hair dryer on low if needed for curves or edges
Trim any excess vinyl with a sharp blade
Press all edges firmly to ensure adhesion
Avoid touching the adhesive side before application
Let the vinyl set before heavy use or washing
Clean finished vinyl with a soft cloth and mild soap
Avoid abrasive cleaners and rough scrubbing