Gather brake fluid, a wrench, clear hose, catch bottle, jack, jack stands, and a helper or vacuum bleeder
Check the vehicle’s brake fluid type and fill the master cylinder to the correct level
Start with the brake caliper or wheel cylinder farthest from the master cylinder
Attach the clear hose to the bleeder screw and place the other end in a catch bottle with a small amount of clean brake fluid
Have the helper press and hold the brake pedal
Open the bleeder screw slightly
Close the bleeder screw before the pedal is released
Repeat until no air bubbles come out
Keep the master cylinder reservoir topped up during the process
Move to the next wheel in the proper bleeding sequence
Repeat for all wheels
Tighten all bleeder screws securely
Clean any spilled brake fluid immediately
Check the brake pedal feel
Refill the master cylinder to the correct level
Test the brakes at low speed in a safe area