Park the vehicle on a level surface and turn it off
Verify the correct replacement tire pressure sensor for your vehicle
Remove the wheel from the vehicle
Deflate the tire completely
Break the tire bead from the rim
Remove the tire from the wheel
Locate the tire pressure sensor inside the wheel
Remove the sensor retaining nut or fastener
Remove the old sensor from the valve stem area
Install the new sensor in the same position
Tighten the retaining nut to the manufacturer’s specified torque
Reinstall the tire onto the wheel
Inflate the tire to the recommended pressure
Reinstall the wheel on the vehicle
Reset or relearn the TPMS system if required
Check for leaks and confirm proper sensor operation