Sell custom 3D-printed products
Offer prototyping services for inventors and startups
Print replacement parts on demand
Create and sell 3D models online
Provide 3D printing services to local...
Choose the object you want to create
Decide the model’s dimensions
Pick a 3D modeling program
Set the units and scale
Create the basic shape
Add details and features
Keep...
Sell custom 3D-printed products on Etsy, eBay, Amazon, or Shopify
Offer personalized gifts, nameplates, keychains, and ornaments
Print replacement parts for appliances, furniture, tools, and vehicles
Create...
Heat the nozzle to the filament’s printing temperature
Remove the filament from the extruder
Wipe the outside of the nozzle with a brass brush or lint-free...
Clean the print with soap and water
Remove supports and trim excess material
Sand the surface with fine-grit sandpaper
Fill gaps or layer lines with filler or...
Choose the object you want to make
Decide the model’s size and purpose
Pick 3D modeling software
Create the basic shape
Add details and features
Check wall thickness and...
Use a filament dryer or dry box; the P1S is not a filament dryer
Remove the spool from the printer before drying
Follow the filament manufacturer’s...
Check the filament type and recommended drying temperature from the manufacturer
Remove the spool from the printer
Place the filament in a filament dryer, food dehydrator,...
Turn off the printer and let the bed cool completely
Remove any filament, prints, and loose debris
Scrape off stuck residue with a plastic scraper or...
Sand with coarse grit first, then progressively finer grits
Use needle files for tight corners and small edges
Trim rough edges with a hobby knife or...
Choose a 3D modeling software
Define the object’s dimensions
Create a basic shape
Add details and features
Keep the design manifold and watertight
Avoid thin walls and unsupported overhangs
Check...
Define the purpose of the print
Choose the right 3D printing process
Set the target dimensions and tolerances
Model the part in CAD software
Keep geometry simple and...
Open your project in Bambu Studio
Click File
Select Save Project As
Choose the 3MF file format if prompted
Select a folder to save the file
Click Save
If needed,...
Choose a 3D modeling software
Define the object’s dimensions
Create a basic shape
Add details and features
Use precise measurements
Keep walls thick enough for printing
Avoid unsupported overhangs
Check for...
Open Bambu Studio and load your model
Select the model in the workspace
Go to the right-side panel and open the Process or Object settings
Click the...
Increase top solid layers in slicer
Increase top thickness
Reduce layer height
Lower print speed for top layers
Increase top infill percentage
Use ironing
Enable monotonic top surface
Calibrate flow rate
Calibrate...
Level the print bed
Set the nozzle-to-bed Z offset
Clean the nozzle and bed surface
Check and tighten belts, pulleys, and frame screws
Verify stepper motor movement and...
Open your project in Orca Slicer
Go to the layer where you want the pause
Right-click the layer slider or layer preview
Select Add Pause
Choose the pause...
Open your model in Bambu Studio
Click the Support tool in the top toolbar
Enable supports for the model
Choose the support type you want
Select Auto Supports...
Open Elegoo Slicer
Load or select your model
Click the print settings or profile panel
Find the speed section
Adjust the print speed value
Change outer wall speed if...
Set up the 3D printer on a stable surface
Install the required software or slicer
Load the 3D model file
Choose print settings
Select the correct material
Load the...
