Park on a level surface and secure the vehicle
Check the brake fluid type specified by the manufacturer
Fill the master cylinder reservoir to the proper level
Remove the wheel if needed for access to the bleeder screw
Attach a clear hose to the bleeder screw and place the other end in a container
Have an assistant press the brake pedal slowly and hold it down
Open the bleeder screw slightly
Close the bleeder screw before the pedal is released
Repeat until no air bubbles appear in the fluid
Keep the master cylinder reservoir filled during the process
Bleed the brakes in the manufacturer-specified order
Tighten all bleeder screws to the correct specification
Refill the master cylinder reservoir to the proper level
Check for leaks at all bleeder screws and fittings
Pump the brake pedal to confirm a firm feel
Test the brakes at low speed in a safe area