Clean the wheel thoroughly with soap and water
Dry the rim completely
Mask off the tire and surrounding area with painter’s tape
Sand the damaged area with fine-grit sandpaper
Feather the edges of the scratch with progressively finer grit
Fill deep gouges with metal filler or wheel repair putty
Let the filler cure fully
Sand the repaired area smooth and level
Wipe the rim with isopropyl alcohol or a degreaser
Apply primer to the repaired section
Let the primer dry according to the product instructions
Apply matching wheel paint in thin coats
Let each coat dry before applying the next
Apply clear coat if needed
Let the finish cure completely
Remove the masking tape carefully
Polish the repaired area if appropriate
Check for any remaining rough spots and repeat sanding if needed
Use a professional wheel repair service for severe bends, cracks, or large damage