Turn off power at the circuit breaker
Verify the power is off with a voltage tester
Remove the existing light fixture or old fan
Check that the electrical box is rated for ceiling fan support
Replace the box if it is not fan-rated
Assemble the ceiling fan parts according to the manufacturer’s instructions
Install the mounting bracket to the electrical box
Feed the fan wires through the canopy and downrod, if applicable
Attach the downrod or motor housing to the mounting bracket
Connect the wires: black to black, white to white, green or bare to ground
Secure all wire connections with wire nuts
Tuck the wires neatly into the electrical box
Attach the fan canopy to cover the bracket and wiring
Install the fan blades
Install the light kit, if included
Tighten all screws and hardware
Restore power at the breaker
Test the fan and light functions
Balance the blades if needed