Read the fireplace’s manufacturer instructions
Make sure the gas supply is turned on
Check that the fireplace and surrounding area are clear
Locate the control panel, gas valve, and ignition switch or pilot assembly
Turn the control knob to the pilot position if required
Press and hold the control knob if the model has a pilot light
Press the igniter button or use the built-in ignition switch
Keep holding the control knob for the required time after the pilot lights
Release the control knob and confirm the pilot stays lit
Turn the control knob to the on position
Use the wall switch, remote, or control panel to light the main burner
Adjust the flame height if your model allows it
Turn the fireplace off by switching it to the off position
Shut off the gas supply if the fireplace will not be used for a long time
Stop and call a professional if you smell gas or the fireplace will not light