Turn off the power to the outlet at the breaker panel
Verify the power is off with a voltage tester
Remove the outlet cover plate
Unscrew the outlet from the electrical box
Pull the outlet out gently
Take a photo or note the wire connections
Loosen the terminal screws or release the back-wired connections
Disconnect the wires from the old outlet
Inspect the wires for damage or corrosion
Connect the wires to the new outlet
Attach the black or red wire to the brass screw
Attach the white wire to the silver screw
Attach the ground wire to the green screw
Tighten all connections securely
Fold the wires neatly back into the box
Screw the new outlet into place
Reinstall the cover plate
Turn the power back on at the breaker
Test the outlet for proper operation