Preheat the iron to the setting recommended for the specific Cricut Iron-On vinyl
Place the fabric on a hard, heat-safe surface
Preheat the fabric for a few seconds to remove moisture and wrinkles
Cut and weed the design
Position the design shiny side up on the fabric
Cover the design with a pressing sheet, parchment paper, or a Teflon sheet
Press the iron firmly over the design for the recommended time
Apply even pressure across the entire design
Flip the fabric and press from the back if needed
Let the vinyl cool or peel warm according to the product instructions
Remove the carrier sheet slowly
Repress the design if any edges lift
Wait at least 24 hours before washing
Wash inside out in cold water
Avoid bleach and fabric softener
Tumble dry low or hang dry