Remove the wheel from the bike
Release the brake if needed
Fully deflate the tire
Use tire levers to pry one side of the tire bead off the rim
Remove the inner tube from inside the tire
Inspect the tire and rim for glass, thorns, or sharp debris
Replace or patch the inner tube if needed
Insert a small amount of air into the new or repaired tube
Place the tube inside the tire
Push the tire bead back onto the rim
Make sure the tube is not pinched between the tire and rim
Inflate the tire to the recommended pressure
Reinstall the wheel on the bike
Reconnect the brake if needed
Check that the wheel spins freely and the tire is seated evenly