Set the multimeter to the correct function: AC voltage, DC voltage, resistance, continuity, current, or diode test
Insert the black probe into COM
Insert the red...
Set the multimeter to the correct voltage setting
Choose AC voltage for outlets and AC circuits
Choose DC voltage for batteries and DC circuits
Plug the black...
Turn off power to the circuit
Discharge the capacitor safely
Remove the capacitor from the circuit if possible
Set the multimeter to capacitance mode
Connect the probes to...
Set the multimeter to continuity or resistance mode
Identify the relay coil terminals and contact terminals from the relay diagram
Measure resistance across the coil terminals
Check...
Turn off power to the circuit and remove the fuse
Set the multimeter to continuity mode or the lowest resistance setting
Touch the multimeter probes together...
Discharge the capacitor completely
Set the multimeter to capacitance mode
Remove the capacitor from the circuit if possible
Connect the red probe to the positive terminal
Connect the...
Discharge the capacitor completely before testing
Set the multimeter to capacitance mode if available
Connect the red probe to the positive terminal and the black probe...
Turn off the circuit and disconnect power
Discharge the capacitor completely
Remove the capacitor from the circuit if possible
Set the multimeter to capacitance mode
Insert the test...
Turn off and unplug the circuit
Discharge the capacitor completely
Remove the capacitor from the circuit if possible
Set the multimeter to capacitance mode
Connect the probes to...
Set the multimeter to continuity mode or the lowest ohms range
Identify the relay coil terminals using the relay diagram or pinout
Measure resistance across the...
Turn off power to the circuit and remove the fuse
Set the multimeter to continuity mode or lowest resistance mode
Touch the probes together to confirm...
Turn off power to the circuit
Set the multimeter to continuity mode
Insert the probes into the correct ports
Touch the probe tips together to verify the...
Set the multimeter to DC voltage
Select a voltage range higher than the battery’s rated voltage if needed
Insert the black probe into the COM port
Insert...
Set the multimeter to DC voltage
Select a voltage range higher than the battery’s rated voltage if needed
Insert the black probe into the COM port
Insert...
