Park the vehicle on a flat surface and set the parking brake
Wear safety gloves and eye protection
Remove windshield wipers and cowl trim
Remove rearview mirror, sensors, cameras, and any attached accessories
Cut through the old sealant around the windscreen with a windshield removal tool or wire
Lift out the old windscreen carefully with suction cups
Clean the pinch weld and remove all old adhesive and debris
Inspect the frame for rust, dents, or damage and repair if needed
Apply primer to the glass edge and body flange if required by the adhesive system
Apply a continuous bead of windshield adhesive to the frame
Position the new windscreen into place using suction cups
Press the windscreen evenly into the adhesive
Reinstall trim, wipers, mirror, sensors, and accessories
Allow the adhesive to cure for the recommended time
Check for leaks and proper fit after curing