Park on a flat, safe surface and set the parking brake
Locate the puncture and confirm the tire is repairable
Remove the object causing the leak
Mark the puncture location
Ream the hole with the plug tool
Thread the plug strip through the insertion tool
Coat the plug with rubber cement if included
Push the plug into the hole until only a small amount remains outside
Pull the insertion tool out quickly, leaving the plug in place
Trim excess plug material flush with the tread
Inflate the tire to the recommended pressure
Check for leaks with soapy water
Reinflate or replug if needed
Reinstall the wheel if removed
Drive a short distance and recheck tire pressure