Locate the Learn button on the garage door opener motor unit
Press and release the Learn button
Within 30 seconds, press and hold the button on the remote you want to program
Release the remote button when the opener light flashes or you hear a click
Test the remote to confirm the door opens and closes
For a keypad, press the Learn button on the opener
Within 30 seconds, enter your desired PIN on the keypad and press the Enter button
Wait for the opener light to flash or click
Test the keypad PIN to confirm it works
For a wall control, follow the model-specific pairing steps in the opener manual
If programming fails, replace the remote battery and repeat the steps
If needed, erase all programmed remotes by holding the Learn button until the indicator light goes out, then reprogram each device