Remove all items from the bathroom and ensure strong ventilation
Clean the tub thoroughly with a non-abrasive cleaner
Remove soap scum, mildew, and mineral deposits
Repair chips, cracks, and rust spots with appropriate filler
Sand the entire surface to dull the existing finish
Rinse and dry the tub completely
Mask off surrounding walls, fixtures, drain, and floor
Apply a bathtub etching or bonding cleaner if required by the product
Wipe the surface with a lint-free cloth and tack cloth
Mix the reglazing coating according to the manufacturer’s instructions
Apply the primer if the system requires one
Spray or roll on the first coat of reglazing finish
Apply additional thin coats as directed
Allow proper drying time between coats
Keep dust and moisture away during curing
Remove masking tape carefully after the final coat sets
Reinstall fixtures and drain cover after full curing
Avoid using the tub until the full cure time has passed
Clean the reglazed tub only with non-abrasive cleaners