Remove all items from the bathroom and ventilate the area
Turn off exhaust fans and cover vents if needed to control dust
Clean the tub thoroughly with a strong bathroom cleaner
Remove soap scum, grease, mildew, and mineral deposits
Rinse and dry the tub completely
Repair chips, cracks, and deep scratches with filler
Sand the entire tub surface to dull the finish
Wipe away all sanding dust
Mask off surrounding walls, fixtures, drains, and floors with tape and plastic
Apply a tub-safe etching or bonding cleaner if required by the product
Rinse and dry again according to product instructions
Mix the reglazing coating exactly as directed
Apply the first coat evenly with a sprayer, roller, or brush
Allow the first coat to flash or dry as directed
Apply additional coats as needed for full coverage
Keep the area dust-free while the coating cures
Allow the tub to cure for the full recommended time
Remove masking materials carefully
Reinstall fixtures and clean up the work area
Avoid using the tub until the coating has fully cured
Clean the reglazed tub only with non-abrasive, non-acidic cleaners