Park the vehicle on a level surface and set the parking brake
Disconnect the negative battery cable
Locate the power steering pump
Remove the drive belt or serpentine belt from the pump pulley
Place a drain pan under the pump and hoses
Disconnect the power steering pressure and return hoses
Cap or plug the hose openings
Remove any mounting bolts, brackets, or accessories blocking access
Remove the pump from the engine
Transfer the pulley, reservoir, or fittings to the new pump if required
Install the new pump in position
Tighten the mounting bolts to specification
Reconnect the pressure and return hoses
Reinstall the drive belt or serpentine belt
Fill the reservoir with the correct power steering fluid
Reconnect the negative battery cable
Start the engine and check for leaks
Turn the steering wheel lock to lock several times to bleed air from the system
Recheck the fluid level and top off as needed
Verify proper steering operation
Reinspect all connections and belt tension