Unplug the modem (and router, if already connected) from power
Connect the modem to the router using an Ethernet cable (typically the modem to the router’s WAN/Internet port)
Connect a computer or device to the router using an Ethernet cable (or via the default Wi‑Fi name on the router label)
Plug in the modem and wait for it to fully connect (lights indicate online status)
Plug in the router and wait for it to finish booting (lights stabilize)
Open a web browser on the connected device
Go to the router setup page (common options: http://192.168.0.1 or http://192.168.1.1 or http://routerlogin.net)
Log in using the admin credentials from the router label (or the credentials you previously set)
Run the Quick Setup / Setup Wizard
Select your connection type (often Dynamic IP / DHCP, or follow ISP instructions)
If required, enter ISP login details (PPPoE username/password) or other WAN settings provided by your ISP
Set the Wi‑Fi network name (SSID) and password
Set security settings (use WPA2/WPA3; choose WPA3 if available)
Apply/Save settings
Reboot the router if prompted
Verify internet access on a connected device
Update router firmware if prompted or available in the admin interface
Change the admin password
Disable WPS if available
Optional: Configure guest Wi‑Fi, parental controls, port forwarding, or VPN settings in the router admin panel