Clean the wall surface and remove dust, grease, and loose material
Repair holes, cracks, and dents with joint compound
Sand patched areas smooth and wipe away dust
Protect floors, trim, outlets, and nearby surfaces with plastic and painter’s tape
Apply a primer if needed for better adhesion and even absorption
Choose a texture method such as knockdown, orange peel, skip trowel, slap brush, or roll-on texture
Mix the texture compound to the manufacturer’s recommended consistency
Load the texture tool, sprayer, roller, brush, or knife with the compound
Apply the texture evenly across the sheetrock in sections
Build the texture gradually until the desired pattern is reached
Let the texture set for the proper amount of time
Flatten or modify the texture if using a knockdown or similar finish
Allow the textured surface to dry completely
Lightly sand any rough spots if needed
Prime the textured wall before painting
Paint the finished surface with the desired topcoat