Check your motherboard manual or PC specifications for supported RAM type, speed, capacity, and slot limits
Power off the PC and unplug all cables
Press and hold the power button for a few seconds to discharge residual power
Open the PC case
Ground yourself to avoid static discharge
Locate the RAM slots on the motherboard
Release the clips on the existing RAM slots
Remove the old RAM if replacing modules
Align the notch on the new RAM module with the slot
Insert the RAM firmly until the clips lock into place
Install matching modules in the correct slots for dual-channel operation if applicable
Close the case
Reconnect all cables
Power on the PC
Check BIOS or system settings to confirm the new RAM is detected
Verify the installed memory in the operating system
Run a memory test if needed to confirm stability