Clean the countertop thoroughly with soap and water
Remove grease and residue with a degreaser or trisodium phosphate substitute
Rinse and let the surface dry completely
Lightly sand the laminate with fine-grit sandpaper
Wipe away all dust with a tack cloth or damp microfiber cloth
Tape off sinks, walls, cabinets, and edges
Apply a bonding primer made for laminate surfaces
Let the primer dry according to the label
Lightly sand the primed surface if needed
Wipe away dust again
Apply a durable countertop paint or epoxy coating
Use thin, even coats
Allow each coat to dry fully before applying the next
Apply additional coats as needed for full coverage
Finish with a clear protective topcoat if recommended
Let the countertop cure fully before use
Avoid heavy use, water, and cleaning products during curing