Park the vehicle on a level surface and turn off the engine
Set the parking brake and disconnect the negative battery terminal if required
Relieve fuel system pressure according to the vehicle service procedure
Locate the fuel filter
Raise and support the vehicle if the filter is underneath
Place a drain pan under the fuel filter
Disconnect the fuel lines from the filter
Remove any retaining clips, bolts, or brackets
Remove the old fuel filter
Install the new fuel filter in the correct flow direction
Reattach the retaining clips, bolts, or brackets
Reconnect the fuel lines securely
Reinstall any covers or shields
Reconnect the negative battery terminal if disconnected
Turn the ignition key to the ON position without starting the engine
Check for fuel leaks
Start the engine and inspect again for leaks
Lower the vehicle if raised