Unplug the Keurig and remove the water reservoir
Empty any remaining water from the reservoir
Wash the reservoir, lid, and removable parts with warm soapy water
Rinse thoroughly and reattach the reservoir
Fill the reservoir with fresh water
Place a mug on the drip tray
Run a brew cycle with no K-Cup (use only water)
Discard the water from the mug
Repeat the no-K-Cup brew cycle at least 2 more times
If descaling: fill the reservoir with Keurig descaling solution to the fill line
Place a large mug on the drip tray
Start a brew cycle without a K-Cup
Continue brewing until the reservoir is empty or reaches the “Add Water” level
Rinse the reservoir, then refill with fresh water to the maximum line
Run multiple no-K-Cup brew cycles until the water reservoir is empty and the system runs clear
If needed, wipe the exterior with a damp cloth and dry
Remove and rinse the K-Cup holder and funnel area if accessible
Clean the drip tray and drip tray cover with warm soapy water, then dry and reassemble
Wipe and dry the needle area around the K-Cup holder if accessible
Refill the reservoir with fresh water and run 1 final no-K-Cup brew cycle