Turn off the water supply valves under the sink
Open the faucet to release any remaining water
Place a bucket or towel under the sink
Disconnect the water supply lines from the old faucet
Remove the mounting nuts or brackets holding the old faucet
Lift out the old faucet from the sink
Clean the sink surface around the faucet opening
Insert the new faucet into the mounting holes
Secure the faucet with the provided mounting hardware
Tighten the mounting nuts or brackets under the sink
Connect the water supply lines to the new faucet
Apply plumber’s tape if required on threaded connections
Turn the water supply valves back on
Check for leaks at all connections
Tighten any leaking fittings as needed
Run the faucet for a few minutes to flush the lines
Confirm proper hot and cold water flow