Turn off power at the circuit breaker
Verify power is off with a voltage tester
Remove the existing light fixture or old fan
Check that the electrical box is fan-rated and securely mounted
Replace the box if it is not rated for ceiling fan support
Assemble the ceiling fan according to the manufacturer’s instructions
Attach the mounting bracket to the electrical box
Connect the fan wires to the existing wiring
Connect black to black for fan power
Connect blue to the switched light wire if present
Connect white to white for neutral
Connect green or bare copper to ground
Secure all wire connections with wire nuts
Tuck wires neatly into the electrical box
Attach the fan motor to the mounting bracket
Install the fan blades
Install the light kit if included
Install bulbs and glass shades if applicable
Restore power at the breaker
Test the fan speeds and light operation
Tighten any loose screws or hardware
Balance the blades if the fan wobbles