Park on a level surface, set the parking brake, and chock the wheels
Loosen the axle nut before lifting the vehicle
Loosen the wheel lug nuts
Raise the vehicle and support it securely on jack stands
Remove the wheel
Remove the axle nut completely
Remove any cotter pin, castle nut, or retaining hardware from the suspension components
Disconnect the lower ball joint, tie rod end, or strut bolts as needed for access
Push the CV axle inward through the hub
Remove any axle retaining clip or pry the inner CV joint from the transmission or differential
Drain transmission fluid if required
Remove the old CV axle from the vehicle
Compare the new CV axle to the old one
Install the new CV axle into the transmission or differential
Ensure the retaining clip seats fully
Insert the outer CV axle splines into the hub
Reconnect the suspension components
Torque all fasteners to specification
Install a new axle nut and torque it to specification
Reinstall the wheel
Lower the vehicle
Torque the lug nuts to specification
Refill transmission fluid if any was lost
Test drive and check for leaks, noises, and proper operation