Park on a level surface and engage the parking brake
Loosen the wheel lug nuts
Raise the vehicle with a jack
Support the vehicle with jack stands
Remove the wheel
Remove the brake fluid reservoir cap
Place a drain pan under the caliper
Disconnect the brake hose from the caliper
Cap or plug the brake line to prevent fluid loss
Remove the caliper mounting bolts
Remove the old caliper from the bracket or rotor area
Compare the new caliper to the old caliper
Install the new caliper in position
Install and tighten the caliper mounting bolts
Reconnect the brake hose with new sealing washers if required
Tighten the brake hose fitting to specification
Refill the brake fluid reservoir as needed
Bleed the brake system
Check for leaks at the hose and fittings
Reinstall the wheel
Lower the vehicle
Tighten the lug nuts to specification
Pump the brake pedal until firm
Test the brakes at low speed