Check the vehicle owner’s manual for the exact TPMS relearn or reset procedure
Verify all tire pressures are set to the recommended cold inflation pressure
Inspect the TPMS sensors, battery condition, and valve stems for damage
Use the TPMS reset button if the vehicle is equipped with one
Turn the ignition to the required position as specified by the manufacturer
Enter TPMS relearn mode through the dashboard menu or button sequence
Follow the required sensor activation order for each wheel
Use a TPMS scan tool to activate or register each sensor if needed
Drive the vehicle at the specified speed and distance to complete relearn
Confirm the TPMS warning light turns off after the procedure
Clear any stored TPMS fault codes with a diagnostic tool if required
Replace faulty sensors or dead sensor batteries before attempting reprogramming
Have a tire shop or dealer perform the procedure if the vehicle requires special equipment