Read the saw’s manual before use
Wear safety glasses, hearing protection, and appropriate gloves
Inspect the blade, guard, cord, battery, and shoe before starting
Use the correct blade for the material
Make sure the blade is sharp and properly installed
Unplug the saw or remove the battery before changing the blade
Secure the workpiece with clamps or a stable surface
Mark the cut line clearly
Set the blade depth slightly deeper than the material thickness
Set the bevel angle if needed
Keep the blade guard working freely
Hold the saw with both hands
Stand to the side of the blade path
Start the saw before the blade contacts the material
Let the blade reach full speed before cutting
Guide the saw along the cut line steadily
Keep the base plate flat on the material
Apply steady pressure without forcing the saw
Keep hands away from the blade path
Watch for kickback and avoid twisting the saw
Support both sides of the cut to prevent binding
Release the trigger only after finishing the cut
Wait for the blade to stop completely before setting the saw down
Disconnect power before adjusting, cleaning, or storing the saw
Keep the saw clean and store it safely after use